- 10 -
Bodyweight, bodyfat and body-water
shares can be subject to considerable
fluctuation during the course of a day.
Through these natural fluctuations the
measurements taken at different times
of the day can, in part, differ considerably
from each other. Therefore, if possible
try to ensure that the measurements
are taken…
• under the same conditions, and
• at the same time of day.
Otherwise, the measurement results will
not be comparable with each other.
Variances in the measurement results are
then possibly due not to actual changes
but to differences in the measurement
conditions.
The most exact and realistic measure-
ments are obtained in the early evening
hours. Additionally, the measurements
should always be carried out before
taking a meal.
Strong variances between the measured
values and the actual values can occur
with the following groups:
• Women in the menopause
• High performance professional sport
players
• People with influenza/fevers
• People with swollen legs
• Osteoporosis patients
• Dialysis patients
With these groups, due to the level
of presumed erroneous measurement
results, the measurement of bodyfat/
muscle mass/body-water shares and
the calorie requirements is not meaning-
ful.There are however no potential dan-
gers to the health by these named
groups by using the scales.
To measure …
• bodyweight,
• the share of bodyfat,
• the share of muscle mass, and
• the share of body-water and also
• your personal calorie requirement
for the day
in one procedure:
1 Press the button On/Info once ᕧ or
tap with your foot on the middle of
the scales to switch the scales on.
Shown in the display ᕡ is „0.0
kg
“.
2 Press the buttons Forward ᕢ or Back-
ward ᕦ until the storage space with
your personal data is displayed.
3 Confirm your choice by pressing the
button On/Info ᕧ.
Note:
If you want to measure body weight,
body fat percentage, muscle mass per-
centage and body water percentage as
well as caloric requirement without sto-
ring personal data:
• Press the button On/Info ᕧ or tap
with your foot on the middle of the
scale to switch the scale on.
• Press the button Forward ᕢ or
Backward ᕦ until “GUES” appears in
the display ᕡ.
• Carry out steps 4 to 9 form chapter 8.
“Before the first usage”.
KH 5516
IB_KH5516_KOE4276_UK.qxd 06.07.2007 11:06 Uhr Seite 10