Filter
Top Products
14. Chromatherapy Light Operation
The submerged chromatherapy lights automatically turn on in the stationary setting when you start the
bath.
Press the “Lights” control switch (located on the opposite side of the pump control) once and the
submerged chromatherapy lights will slowly cycle through the color spectrum (sweep mode).
The light control switch pulses blue for five seconds at the start of the sweep mode. Press the “Lights”
control switch again to lock the chromatherapy lights in a particular color.
The light control switch is a constant blue in this mode. Press the “Lights” control switch a third time to
turn off the submerged chromatherapy lights.
When restarting the pump the submerged chromatherapy lights will turn back on.
The chromatherapy lights may be turned on when the pump is off. Turning on the pump when the lights
are operating will not affect the lights.
Kohler Co. 13 1012493-2-A