Filter
Top Products
User Keypad Operation
NOTE: Symbols illuminated in blue indicate available modes/features. Active modes will be illuminated
in green.
Power On/Off - The whirlpool pump turns on and off using the power button.
Heater On/Off - The heater automatically engages when the whirlpool is turned on. To turn the
heater off, rotate the outer ring until the heater mode is flashing and press ″OK.″ Press ″OK″ again
to turn the heater back on. The heater will help to maintain the water temperature up to 104° F (40°
C).
Outer Ring - Rotate the outer ring to the desired mode. The selected mode will flash (blue).
Activate Button - Press ″OK″ to activate the desired mode.
Flexjet Mode - When active, this mode allows you to adjust the water flow to the six Flexjets by
pressing the up or down arrows.
Chromatherapy Cycle - Chromatherapy lights will automatically and continuously cycle through
the eight colors: white, violet, indigo blue, aqua blue, green, yellow, orange, and red. One cycle
through all eight colors takes approximately one minute.
Chromatherapy Specific Color Selection - When this mode is selected, you may choose a specific
color for the bath.
Indicator Bar - The indicator bar displays the water flow volume in the Flexjet mode.
Down Arrow - Decrease the water flow by pressing the down arrow when the Flexjet mode is
active.
Up Arrow - Increase the water flow by pressing the up arrow when the Flexjet mode is active.
Chromatherapy Operation
NOTE: Chromatherapy may be used with all modes of operation. Chromatherapy may also be used when
the pumps are not operating.
Chromatherapy Cycle -When this mode is activated, the chromatherapy lights will automatically and
continuously cycle through all eight colors: white, violet, indigo blue, aqua blue, green, yellow, orange,
and red. One cycle through all eight colors takes approximately one minute.
Rotate the outer ring on the keypad to select this mode and press ″OK″ to activate it.
Press ″OK″ while the chromatherapy mode is active to turn off this mode.
Chromatherapy Specific Color Selection - When this mode is activated, you may choose a specific color
for the bath.
Flexjet Flow Mode
Activates Mode
Selected
Rotate outer
ring to access
desired mode.
Chromatherapy -
Specific Color
Power
On/Off
Heater
On/Off
Chromatherapy
Cycle
Decreases
Flow
Indicator Bar - Shows
Water Flow Volume
Increases Flow
or Pulse Rate
Lighted User Keypad
Kohler Co. 5 1042951-5-B