Filter
Top Products
2. Install the Bath
WARNING: Risk of personal injury. This cast iron bath is extremely heavy. Obtain sufficient help
to carefully lift and move it.
NOTICE: Do not lift the bath by the piping or blower, or use the piping or blower for structural support
of the bath. To avoid damage to the bath, lift by the rim at the sides of the bath.
Carefully move the bath into position.
Level the bath by fitting metal shims under the feet as needed. Check for level along the rim. Make
sure the bath is resting on all four feet.
Cut the Banding Straps
IMPORTANT! This step is necessary to make the bath operate more quietly.
Cut the two banding straps from the blower.
Install the Plumbing
Insert the drain tailpiece into the trap. Secure the drain tailpiece to the trap.
Install the faucet valve.
Check the drain connections for leakage.
Level by fitting metal shims
under the feet.
Cut the banding
straps.
Control
Rubber
Isolation
Feet
Blower
Motor
1199249-2-A 6 Kohler Co.