Filter
Top Products
SECTION 5—WHEELCHAIR OPERATION
Part No. 1123839 29
FIGURE 5.1 Joystick Switches and Indicators
Information Gauge Display
The Information Gauge Display is located on the front of the joystick housing. It provides
the following information to the user on the status of the wheelchair -
1. Power is on.
2. True state-of-battery-charge, including notification of when the battery requires
charging:
A. GREEN LED is lit, indicating well charged batteries.
B. Only AMBER LEDs are lit, indicating batteries are moderately charged. Recharge
batteries before taking a long trip.
C. Only RED LED is lit, indicating batteries are running out of charge. Recharge
batteries as soon as possible.
3. Program, inhibit or charge modes.
4. Fault indication (Flash Codes).
The Information Gauge display also serves as a system diagnostic device when a fault is
detected by the control module. A specific number of flashes of the LEDs indicate the type
of fault detected. Refer to the following table of the diagnostic indications of the
wheelchair status.
Joystick
Information
Gauge
On/Off
Button
To Controller
Multi-Function
Charger Port
Horn
Speed
Control Knob