Filter
Top Products
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Part No. 1123839 25
❑ Inspect tires for flat spots and wear. If tires are pneumatic, check for proper inflation.
❑ Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
Inspect/Adjust Weekly
❑ Seat is secured to wheelchair frame.
❑ Seat release latch is not worn and is functional. Replace if necessary.
❑ Inspect tires for flat spots and wear. If the tires are pneumatic, check for proper
inflation.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Ensure that casters are free of debris.
❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary.
Inspect/Adjust Monthly
❑ Ensure wheel mounting nuts are secure on drive wheels.
❑ Ensure no excessive side movement or binding occurs when drive wheels are lifted
and spun when disengaged (free-wheeling).
❑ Ensure that drive wheel axle bolts and locking tab washers are secure.
❑ Ensure that casters are free of debris.
❑ Inspect caster assembly has proper tension when caster is spun. Caster should come
to a gradual stop.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure that the wheel locks engage properly and do not interfere with the tires when
rolling. Also, ensure that the pivot points are free of wear and looseness.
❑ Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑ Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑ Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
Inspect/Adjust Periodically
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Ensure that casters are free of debris.
❑ Ensure that all fasteners on the clothing guards are secure.
❑ Ensure arms are secure but easy to release and adjustment levers engage properly.
❑ Ensure adjustable height arms operate and lock securely.
❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑ Ensure armrest pads sit flush against arm tubes.