Support User Manuals

Invacare XLT Mobility Aid User Manual

Open as PDF

of 76

SECTION 9—OPTIONS

Part No 1114850 69 Recumbent Handcycle Series

FIGURE 9.15 Removing/Installing the Fork - Travel Ready XLT PRO Equipped with Road

Crown Compensator

Removing/Installing the Fork - XLT Gold, and Top End

Force Equipped with Steering Dampener

NOTE:Forthisprocedure,refertoFIGURE 9.16onpage70.

Removing the Fork

1. Removethelocknutsecuringthesteeringdampenertothedampenerclamp

(DetailʺAʺ).

2. Removethetwosocketscrewssecuringthedampenerclamptothehandcycleframe.

3. Removethedampenerclampfromthehandcycleframeandthelowerthreadedpost

ofthesteeringdampener.

4. Removethetwosocketscrewsfromthefork

clamp.

5. Removetheplatefromthetopofthefork.

6. Removetheforkfromtheframe.

7. Removethefrontwheelfromthefork.RefertoRemovingtheFrontWheel

onpage 70.

Installing the Fork

1. Positiontheforkontotheframe.

2. Positiontheplateontothefork.

Fork Clamp

Plate

Socket

Screws

Fork

Fork

Clamps

Nut

Fork Bolt

Road Crown Compensator

Frame

Fork

Clamp

previous next