Invacare Storm Series Mobility Aid User Manual


 
A.B.S. Curved Back Assembly
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
NOTE: A.B.S. curved back mounts only to Storm Series back canes without a 10 degree bend.
NOTE: Back cover and foam are sold as a back cushion assembly only.
#3 Back Assembly with Hardware - 19" Wide to 22" Wide
Overall
Back Height
Material
Back Height
19" Wide 20" Wide 21" Wide 22" Wide
110703311070231107013110700312"16"
110703411070241107014110700413"17"
110703511070251107015110700514"18"
110703611070261107016110700615"19"
110704211070271107017110700716"20"
110704311070281107018110700817"21"
110704411070291107019110700918"22"
110704511070301107020110701019"23"
110704611070311107021110701120"24"
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Pan 16"-18" 1 11
See Chart #1 Back Pan 19"-22" 1 11
See Chart #2 Back Cushion Assembly 16"-18" 1 12
See Chart #2 Back Cushion Assembly 19"-22" 1 12
See Chart #3 Back Assembly with Hardware 16"-18" 1 13
See Chart #3 Back Assembly with Hardware 19"-22" 1 13
1125723 Kit, Hook Fastener w/ Adhesive Back 1 1A
A - Not Shown. Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a
new Back Pan or Back Assembly is requested.
NOTE:
44
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
03-034