Filter
Top Products
Tilt Assembly and Mounting Hardware
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1120175 Roller, Cam 1 21
1120214 Cam Roller, Seat Support 1 12
1018248 Nut, 5/16-18 1 23
1108437 Bumper, Rubber 1 24
1120184 Mounting, Lower Pivot 1 15
1100023 Screw, Button Head w/Patch (1/4-20 x 1/2") 1 46
1028410 Screw, Socket Button Head (1/4-20 x 7/8") 1 27
1120196 Sleeve, Front Pivot Joint 1 28
1120169 Bearing, Flange 1 29
1025195 Locknut (1/4-20) 1 510
1120195 Spacer, Front Pivot Joint 1 511
1071955 Screw, Socket Button Head (5/16-18 x 3/4") 1 212
1068039 Pin, Pull 1 113 A
1114308 Screw, Phillips Pan Head Tap (#10-32 x 1/2") 1 114
1039860 Screw, Hex Head Cap with Patch (5/16-18 x 3/4") 1 415
1079247 Washer, Flat (21/64 x 53/64 x 7/64") 1 416
1120229 Rail Slide -Right 1 117
1113341 Nut, Strap 1 218
1120230 Rail Side -Left 1 119
1120224 Screw, Socket Head (3/8 x .625") 1 220
1120194 Front Link 1 121
1072692 Lockwasher, Split (5/16") 1 222
1124299 Key, Ball Point T-Handle 3/16" Hex 1 123 B
A - Pull Pin no longer used as of 11/12/04, see page titled "Prop Rod Assembly"
B - The T-Handle Hex Key is used to remove item 12 (Socket Button Head Cap Screw). Item 5 (Lower Pivot Mounting) can
then be raised up to provide clearance to remove the batteries.
NOTE:
17
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
03-034