Filter
Top Products
Battery Boxes and Trays
NOTE: Light Duty, 250-S Models use UI batteries with 22NF battery boxes.
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1097007 Battery Box Assembly, Rear (22NF) 1 21 G
1097003 Battery Box Top, Rear (22NF) 1 22 A,B,G
1057944 Battery Box Bottom with Strap 1 23 H
1057954 Battery Strap 1 23
1041433 Pin, Handle 1 23
1071532 Battery Tray Assembly with Hardware 1 14 I
1071490 Tray with Strap and Buckle 1 25
1025752 Screw, Hex Head (1/4-20 x 1-1/2") 1 46
1071566 Pin, Tray 1 47
15680X012 Collar, Anti-Rattle (7/8") 1 48
7930333 Locknut (1/4-20) 25 19
1071531 Tray Support 1 110
1021406 Screw, Hex Head (1/4-20 x 1-1/4") 1 411
1074127 Decal, Tray 1 112
1071543 Bracket, Tray 1 213
1071505 Screw, Socket Head Cap with Patch (M6 x 20MM) 1 314
1071504 Screw, Socket Head Cap with Patch (M6 x 35MM) 1 315 J
1079193 Battery Tray with Strap, Weight Shifting Tilt 1 116
50000X166-NLA Fuse, 60 Amp (Buss 2-1/4" Long) 1 2A,E
1089385 Fuse, 80 Amp, MIDI (Non-G/B & G/B) 1 2E,F
1060318 Hardware, Battery Terminal, UI Batteries (Pair) 2 1C,E,K
1058618 Hardware, Battery Terminal, 22NF Batteries (1 Pair) 2 1D,E
A - As of 11/5/99 the battery harness fuse changed from Bussman 60 AMP to a MIDI 80 AMP fuse. This battery box top is
compatible for all chairs manufactured before 11/5/99 and must be ordered whenever a replacement Bussman 60 AMP
fuse is requested.
B - It is recommended that new terminal hardware be ordered when a new battery box top is ordered.
C - Hardware includes small battery terminal caps (gray and orange), 1/4-20 x 7/8" hex flange screws, 1/4-20 hex flange nuts,
cable ties, locking tab washers and instruction sheet for two batteries.
D - Hardware includes battery clamps, battery clamp caps (red and black), small battery terminal caps (red and black), 1/4-20
x 7/8" hex flange screws, 1/4-20 hex flange nuts, cable ties and locking tab washers for two batteries.
E - Not Shown.
F - After 11/4/99 - Dual Battery Box or After 11/9/00 - Single Battery Box.
G - 22NF and UI 250-S Models.
H - #1057944 includes: (2) each #1057954 Battery Strap and (2) each #1041433 Handle Pin.
I - Includes items 5-13.
J - (3) each required for Non-Weight Shifting Tilt and (2) each required for Weight Shifting Tilt.
K - 250-S Models.
NOTE:
67
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
97-187