Filter
Top Products
Motor, 4-Pole, Gearboxes and Drive Wheel
Item
Number
Description
Ranger II M.W.D. and
W.S.T. w/ Brake Lever
(After 3/14/99)
1101725
Plastic Tip
(After 10/28/01)
10
1082985Slotted Plate11
1064177
Drive Wheel with Foam Fill
(12-1/2")
12
See Note(s) A
1064178
Drive Wheel, Pneumatic
(12-1/2")
12
See Note(s) A
1011524
Tire
(12-1/2" x 2-1/4")
13
1073936-NLA
Flat Free Insert14
See Note(s) B
1011525
Tube
(12-1/2" x 2-1/4")
15
1023264Key16
1023262
Washer
(11/32 x 13/16 x 1/8")
17
1064179
Washer, Locking Tab
(Pair)
18
7930322
Screw, Hex Head
(M8 x 1-1/4 x 20MM) (Pkg. of 25)
19
1074974-NLA
Shroud Cover Black,
Drive Wheel
20
1071505
Screw, Socket Head
(M6 x 20MM)
21
1071504
Screw, Socket Head
(M6 x 35MM)
22
See Note(s) C
1021260
Cable Tie
(5-5/8" Long)
23
A - Drive wheel comes with a locking tab and instruction sheet.
B - As of 10/20/99, the "solid" flat free insert was replaced by a "foam fill" process. When a Flat Free Insert is requested, a
complete wheel must be ordered.
C - Weight Shifting Tilt takes only 2 per side for item 22.
D - Coupling with Cup for chairs manufactured before 11/12/01 - Use part # 50000X007 as a direct replacement part.
E - After 11/11/01 Coupling with Cup was resized from approximately 1" to 1-5/16" diameter and can be used as a direct
replacement for part number 5165204
F - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 9) must be ordered.
Invacare Corp. utilizes alternate suppliers for this part number.
G - As of May 2008, the Metal Motor End Cap will be replaced with a Composite Motor End Cap. The change does not affect form,
fit, function or aesthetics.
NOTE:
NOTE: See page for 2-Pole Motors with brake levers for chairs made before 3/15/99.
NOTE: MWD-R motor/gearbox is also used as a RWD-L motor/gearbox and MWD-L motor/gearbox is used as a RWD-R. The part numbers
are already switched around respectively for this MWD page.
63
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
97-187