Filter
Top Products
Part No 1167609 3 Bath Board
3 Usage
3.1 Installing the Bath Board
1. Place the bath board (A) onto a hard, flat
surface.
2. Align the handle (B) with the proper mounting
hole in the bath board.
3. Press the bath board handle into the mounting
holes (C).
4. Ensure the handle latches securely into the bath
board.
5. Ensure the handle cannot be pulled out of the
bath board after installation.
ƽ
WARNING: Risk of Falling.
The bath board MUST BE installed properly.
ALWAYS install the bath board at least .78 in
(2 cm) away from tub fixtures.
At least .78 in (2 cm) of the bath board MUST
hang over the outside of the tub.
Maximum Tub Wall Thickness: .78 in (20
mm)
Maximum Tub Width: 24.8 in (630 mm)
Minimum Tub Width: 15.5 in (395 mm)
DO NOT use the bath board with tubs that
have no inner wall.
One mounting hole is round and the
other mounting hole is square.
B
C
A