Filter
Top Products
Part No 1171791 3 Invacare® Matrx® Flo-tech
3 Usage
3.1 Installing the Invacare Matrx Flo-tech
1. Position the cushion so the material identification tags (not shown) face the rear.
2. Align the hook and loop strips (not shown) on the bottom of the cushion with those on the
wheelchair seat.
3. Position the cushion onto the wheelchair as far back as possible.
4. Press down to ensure the hook and loop strips are firmly engaged.
4 Care and Maintenance
4.1 Cleaning
Outer Cover
The cover can be wiped clean with a damp towel.The cover can be removed for laundering. Unzip the
cover and carefully remove the foam with inner liner. Machine wash in warm water and hang dry. Dry
completely before reinstalling the outer cover .
Inner Liner
The inner liner should not be removed from the foam.
4.2 Inspection
Visually inspect parts including upholstery materials, foams (if accessible), and plastics, for deformation,
corrosion, breakage, wear or compression.
WIDTH DEPTH WEIGHT
LIMIT*
14 IN
(36 CM)
16 IN
(41 CM)
17 IN
(43 CM)
18 IN
(46 CM)
19 IN
(48 CM)
20 IN
(51 CM)
21 IN
(53 CM)
22 IN
(56 CM)
14 in (36 cm) FT1414 FT1416
300 lbs
(136 kg)
15 in (38 cm)
FT1516 FT1517 FT1518 FT1519 FT1520 FT1521
16 in (41 cm) FT1616 FT1617 FT1618 FT1619 FT1620 FT1621
17 in (43 cm) FT1716 FT1717 FT1718 FT1719 FT1720 FT1721
18 in (46 cm) FT1816 FT1817 FT1818 FT1819 FT1820 FT1821
19 in (48 cm) FT1916 FT1917 FT1918 FT1919 FT1920 FT1921
20 in (51 cm) FT2016 FT2017 FT2018
20 in (51 cm) FT2020 FT2022 500 lbs
(227 kg)
21 in (53 cm)
FT2118 FT2120 FT2122
22 in (56 cm) FT2218 FT2220 FT2222
23 in (58 cm)
FT2320 FT2322
24 in (61 cm) FT2420 FT2422
Avoid the use of additional covers or padding between the user and the cushion, as this could
reduce its effectiveness.
ƽ
CAUTION
DO NOT use cleaning agents containing phenols or alcohols. Otherwise product damage may
occur.
ƽ
WARNING
DO NOT continue to use this product if problems are discovered. Corrective maintenance can
be performed at or arranged through your equipment supplier.