Invacare FT Wheelchair User Manual


  Open as PDF
of 4
 
Invacare® Matrx® Flo-tech 2 Part No 1171791
2 Safety
2.1 Intended Use
The Invacare Matrx Flo-tech cushion is designed to provide the highest level of skin protection for users
with high risk of skin breakdown.
2.2 General Warnings
2.3 Weight Limitation and Model Numbers
Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact
carrier/dealer for further instruction.
ƽ
WARNING
DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT WITHOUT
FIRST COMPLETELY READING AND UNDERSTANDING THESE INSTRUCTIONS AND
ANY ADDITIONAL INSTRUCTIONAL MATERIAL SUCH AS OWNER’S MANUALS, SERVICE
MANUALS OR INSTRUCTION SHEETS SUPPLIED WITH THIS PRODUCT OR OPTIONAL
EQUIPMENT. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS OR
INSTRUCTIONS, CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL
PERSONNEL BEFORE ATTEMPTING TO USE THIS EQUIPMENT - OTHERWISE, INJURY OR
DAMAGE MAY OCCUR.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with Invacare
accessories. Accessories designed by other manufacturers have not been tested by Invacare and
are not recommended for use with Invacare products.
INSTALLATION WARNING
After any adjustments, repair or service and before use, make sure that all attaching component
parts are secure.
Ensure the seat cushion is properly secured to the wheelchair before using. Otherwise injury or
damage may occur.
Installing a cushion on a wheelchair may affect the center of gravity of the wheelchair and may
cause the wheelchair to become unstable, potentially resulting in injury.
WARNING
Skin condition should be checked very frequently after the installation of any new seating system.
Your therapist and physician should be consulted if you have any questions regarding individual
limitations and needs.
Working with your therapist, physician, and equipment supplier is the best way to assure that a
seating choice matches your individual needs.
As the needs of the individual become more complex, the seating evaluation becomes more
important.
The cushion is designed to be used only at room temperature. If it is left at lower temperatures,
always allow it to warm to room temperature before using. Sitting on extremely cold or hot
surfaces can cause skin damage.
Avoid sharp objects or exposure to excessive heat or open flame.
Refer to the chart for the weight limitation and stock model numbers.
Configured model numbers are: FT
Grey = size not available
 previous next