Filter
Top Products
MK5 SAC and Mounting Hardware
Conventional Tilt & Tilt w/ BPO Option 1/17/05-4/14/05
Mounting hardware after 1/16/05 will now accommodate the Personal Back 10 and DualFlex Backs from
Invacare.
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
1128358 Kit, SAC/Mercury Switch Mounting Hardware
For Conventional Tilt Only
1 11 A
Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") 1 23
Bracket, Mercury Switch 1 14
Washer (1/4 x 1/2 x 1/16") 1 25
Locknut (1/4-20) 1 26
Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") 1 67
Bracket, Mercury Switch Mounting 1 18
Bracket, Controller 1 19
Screw, Phillips Pan Head (#4-40 x 3/8") 1 410
Washer (1/4 x 1/2 x 1/16") 1 611
Locknut (1/4-20) 1 612
Bracket, Standoff 1 213
Screw, Hex Head (1/4-20 x 1-1/8") 1 414
Half Clamp, Non-Threaded Holes 1 215
Half Clamp, Threaded Holes 1 216
Screw, Phillips Pan Head Tap (#10-32 x 1/2") 1 417
Bracket, Seat Pan Wiring 1 218
1123268 Harness, Tilt Mercury Switch 1 119
1119458-NLA Control, MK5 SAC 1 120 C
1126179 Harness, Actuator Extension
To SAC or TRSS
1 121
1119418 Cable, Auxiliary Power 1 122
1125770 Kit, Mercury Switch Mounting Hardware 1 12 B
Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") 1 23
Bracket, Mercury Switch 1 14
Washer (1/4 x 1/2 x 1/16") 1 25
Locknut (1/4-20) 1 26
A - Includes items 3-18
B - Includes items 3-6
C - MK5 SAC was discontinued and replaced with a MK5 TAC. See page titled "MK5 TAC and Mounting Hardware" dated
01/06/06-01/25/06
NOTE:
96
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
06-102