Filter
Top Products
MK5 TAC, Shroud Cover, Mercury Switches and Mounting
Hardware
Conventional Tilt & Tilt w/ BPO Option After 1/25/06
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
Harness, Drive Lockout Mercury Switch 1 25
Screw, Hex Head Cap w/ Patch (1/4-20 x 1/2") 1 107
Bracket, Mercury Switch 1 18
Washer (1/4 x 1/2 x 1/16") 1 109
Locknut (1/4-20) 1 1010
Bracket, Mercury Switch Mounting 1 1
Bracket, Controller 1 1
Screw, Hex Head (1/4-20 x 1-1/8") 1 4
Bracket, Standoff 1 2
Half Clamp, Non-Threaded Holes 1 2
Half Clamp, Threaded Holes 1 2
Cable Tie (11-1/2" Long) 1 10
Cable Tie (5-5/8" Long) 1 10
Instruction Sheet, MK5 SAC To MK5 TAC
Conversion For Formula (Contoura Tilt or Recline) &
(Conventional Tilt or Recline) on TDX
1 1
1095503 Package, Cable Ties (5-5/8" Long) 10 1H
1095502 Package, Cable Ties (11-1/2" Long) 10 1H
1141486 Instruction Sheet, MK5 SAC To MK5 TAC
Conversion For Formula (Contoura Tilt or Recline) &
(Conventional Tilt or Recline) on TDX
1 1H
A - Includes items 7-10
B - Includes items 12-14 and 16-21
C - Includes items 12-21
D - Includes items 2, 12-14, 16-21 and 23-26
E - Includes items 2, 12-21 and 23-26
F - When converting a MK5 SAC to a MK5 TAC, refer to the Conversion Kit part # 1142597. Convertion Kit includes all parts
needed to convert a (Contoura Recline Only, Contoura Tilt Only or Conventional Tilt Only)
G - Not Shown. Kit components for a Conventional Tilt Only uses items 1, 2, 5, 7-10, Cable Ties and Instruction Sheet
H - Not Shown
NOTE:
109
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
06-102