Filter
Top Products
Formula™ CG Tilt Manual Center Mount Front Rigging 6 Part No 1145733
Mounting the Release Lever Assembly to the Seat
Frame
NOTE:Forthisprocedure,refertoFIGURE 4.
NOTE:Thereleaseleverassemblyconsistsofthereleasehandle,cableandratchethousing.
1. Inserttheglidebearingintotheratchethousing.
2. Usingthetwo10‐32X.69panheadscrewsand#10lockwashers,securethe
cable/brakeassemblytotheratchethousing.Torqueto32in‐lbs.
3. Securetheratchethousingtothemountingbracketonthecentermountfrontrigging
supportwiththe5/16X1.625inchsocketheadshoulderscrewand1/4 ‐20inchlocknut
provided(Detail“A”).Torqueto79in‐lbs.
4. Securethereleasehandletothereleasehandlemountingbracket
withthe10‐32X.50
inchsocketheadscrewand10‐32inchsquarenut.Securelytighten.
5. SecurethereleasehandlemountingbrackettotheT‐nutinthesiderailwiththe
5/16‐18X.50inchhexheadbolt.Torqueto13ft‐lbs.
6. Tie‐wrapcableas
showninDetail“A ” .
FIGURE 4 Mounting the Release Lever Assembly to the Seat Frame
5/16 X 1.625 inch Socket
Head Shoulder Screw
Ratchet Housing
1/4-20 inch Locknut
Center Mount Front
Rigging Support
NOTE:Seatpannot
shownforclarity.
DETAIL “A”
Seat Frame
10-32 inch
Square Nut
Release Handle
Release Handle
Mounting Bracket
Tie-Wrap the
Cable Here
10-32 X .50 inch
Socket Head Screw
T-Nut
(Shown exploded
for clarity)
Side Rail
Cable
5/16-18 X .50 inch
Hex Head Bolt