Filter
Top Products
Formula™ CG Tilt Manual Center Mount Front Rigging 8 Part No 1145733
Adjusting the Height of the Manual Center Mount
Footrest
ƽ WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is
three inches. If the wheelchair is not moving, the front rigging MUST maintain a
minimum of one inch ground clearance - otherwise personal injury and damage may
result.
NOTE:Forthisprocedure,refertoFIGURE 6.
1. Loosenthetwomountingscrewsthatsecurethebuttonheadcleattotheextension
housing.
2. Adjustthefootrestextensiontubetothedesiredheight.
3. Securetheextensiontubetothedesiredheightwiththebuttonheadcleatand
mountingscrews.Securelytighten.
4. RepeatSTEPS1‐3fortheotherextensiontube.
FIGURE 6 Adjusting the Height of the Manual Center Mount Footrest
Extension
Housing
Extension Tube
Mounting Screws
Extension Tube Mounting Holes
Button Head Cleat