Invacare 9859 Mobility Aid User Manual


 
13
SAFETY INSPECTION CHECK LIST
S
A
F
E
T
Y
I
N
S
P
E
C
T
I
O
N
ITEM
GENERAL
Wheelchair rolls straight (no excessive drag or pull to one side).
SEAT AND BACK (PROCEDURE 3)
Inspect for rips or sagging.
Inspect for loose or broken hardware.
REAR WHEELS (PROCEDURE 4)
No excessive side movement or binding when lifted and spun.
HANDRIMS (PROCEDURE 4)
Inspect for signs of rough edges or peeling.
SPOKES
Inspect for broken spokes.
FRONT CASTER (PROCEDURE 5)
Inspect wheel/fork assembly for proper tension by spinning caster;
caster should come to a gradual stop.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Wheel bearings are clean and free of moisture.
CAUTION: As with any vehicle, the wheels and tires should be
checked periodically for cracks and wear, and should be replaced.
TIRES
Inspect for flat spots and wear.
If pneumatic tires, check for proper inflation.
CAUTION: As with any vehicle, the wheels and tires should be
checked periodically for cracks and wear, and should be replaced.
WHEEL LOCKS (PROCEDURE 7)
Do not interfere with tires when rolling.
Pivot points free of wear and looseness.
Wheel locks easy to engage.
CLEANING
Clean upholstery and armrests.
SAFETY INSPECTION CHECKLIST
NOTE: Every six (6) months take your wheelchair to a qualified dealer for a thorough inspection and servicing. Regular cleaning
will reveal loose or worn parts and enhance the smooth operation of your wheelchair. To operate properly and safely, your
wheelchair must be cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
Initial adjustments should be made to suit personal body structure/preference. Thereafter follow these maintenance procedures:
INITIALLY
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
INSPECT/
ADJUST
WEEKLY
X
X
X
X
X
INSPECT/
ADJUST
MONTHLY
X
X
X
X
INSPECT/
ADJUST
PERIODICALLY
X
X
X
X
X
X
X