Support User Manuals

Invacare 9000 Series Mobility Scooter User Manual

Open as PDF

of 88

SECTION 7—RECLINER

Part No. 1076155 77 9000 Series

FIGURE 7.15 Adjusting Attendant Operated Wheel Locks

Changing Seat-to-Floor Height

NOTE:Forthisprocedure,refertoFIGURE 7.16.

1. Removetherearwheels.RefertoRemoving/InstallingRearWheelsonpage 75.

2. Ifnecessary,adjustthefrontcasterpositioninthefork.RefertoFrontCasterMounting

Adjustmentsonpage 26.

3. Reinstalltherearwheelsontothewheelchair.RefertoRemoving/InstallingRear

Wheelsonpage 75.

4. Adjustthewheellocks.Forattendantoperatedwheellocks,refertoUsing/Adjusting

theWheelLocksinthereclinersectionorforpatientoperatedwheellocks,referto

Using/AdjustingthePatientOperatedWheelLocksintheOwner’sManual,part

number1056953.

ƽ WARNING

After changing the seat-to-floor height, the anti-tippers MUST be replaced before

using the wheelchair. Refer to Installing Anti-Tippers on page 78.

5. Refertothefollowingtableofrearwheelsizestodetermineadjustmentsfor

obtainableseat‐to‐floorheights.

DETAIL “A” - WHEEL LOCK SHOE ENGAGEMENT

1/8-inch (3/16-inch

pneumatic tires)

Recliner Tube

Wheel Lock

Shoe

Wheel Lock Handle

Bolt and Locknut

Tire

Section

Tire Contact

Area

Wheel Lock

Shoe

Tire

Wheel Lock

Shoe

Rear Wheel

previous next