Support User Manuals

Invacare 9000 Series Mobility Scooter User Manual

Open as PDF

of 88

SECTION 7—RECLINER

Part No. 1076155 69 9000 Series

Replacing Recliner Tube

NOTE:Forthisprocedure,refertoFIGURE 7.9.

1. Removethemountingscrewandlocknutthatsecurethelockingrodtothebacktube

mountingbracket.

2. Slideanti‐rattleupandoffoflockingrod.

3. Ifapplicable,performthefollowing:

A. Loosentheboltandlocknutthatsecuretheattendantoperatedwheellocktothe

reclinertube.

B. Slidetheattendantoperatedwheellockupandoffofthelockingrod.

4. Disconnectthelowercableassembly.RefertoDisconnecting/ConnectingLowerCable

Assemblyonpage 61.

5. Removelockingrodfromexistingreclinertube.

6. Removetherearwheel.RefertoRemoving/InstallingRearWheels

onpage 75.

7. Removetheshoulderboltandlocknutthatsecurethelowerportionoftherecliner

tubetothewheelchairframe.

8. Securelowerportionofthenewreclinertubetowheelchairframewithexisting

shoulderboltandlocknut.Securelytighten.

9. Installexistinglockingrodintonewreclinertube.

10. Ifapplicable,performthefollowing:

A. Slidethenewattendantoperatedwheellockdownlockingrodandontothe

reclinertube.

B. Positiontheattendantoperatedwheellockabovethecutoutinthereclinertube

andtightentheboltandlocknut.

11. Repositiontheanti‐rattleontothereclinertube.

12. Re‐securethelockingrodtothebacktubemounting

bracketwiththeexisting

mountingscrewandlocknut.Securelytighten.

13. Reconnectlowercableassembly.RefertoDisconnecting/ConnectingLowerCable

Assemblyonpage 61.

14. Reinstalltherearwheel.RefertoRemoving/InstallingRearWheelsonpage 75.

15. Ifapplicable,adjusttheattendantoperatedwheellock.RefertoUsing/Adjustingthe

WheelLocksintheownerʹsmanual,partnumber1056953.

previous next