Filter
Top Products
A.B.S. Curved Back w/o Attaching Hardware (Before
4/21/03)
Recline Only (2GR) and Tilt/Recline (2GTR) w/ V.S.R.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 8-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly
#3 Back Assembly w/o Hardware 20" Wide - 22" Wide
Overall
Back
Height
Material
Back
Height
20" W 21" W 22" W
10905671090566109056511"20"
10905741090573109057212"21"
10905811090580109057913"22"
10905881090587109058614"23"
10905951090594109059315"24"
10906021090601109060016"25"
10906091090608109060717"26"
10906161090615109061418"27"
10906231090622109062119"28"
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart #1 Back Pan 16" Wide - 19" Wide 1 11
See Chart #1 Back Pan 20" Wide - 22" Wide 1 11
See Chart #2 Back Cushion Assembly 16" Wide - 19" Wide 1 12
See Chart #2 Back Cushion Assembly 20" Wide - 22" Wide 1 12
See Chart #3 Back Assembly w/o Hardware 16" Wide - 19"
Wide
1 13
See Chart #3 Back Assembly w/o Hardware 20" Wide - 22"
Wide
1 13
1125723 Kit, Hook Fastener w/ Adhesive Back 1 1A
A - Not Shown. Hook Fastener Adhesive Kit is used to attach a Back Cover to the Back Pan and must be ordered when a new
Back Pan or Back Assembly is requested.
NOTE:
69
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
99-150