Filter
Top Products
MAINTENANCE AND TROUBLESHOOTING
Traverse Lift/Transporter 28 Part No. 1150696
Troubleshooting
NOTE:Ifproblemsarenotremediedbythesuggestedmeans,pleasecontactICCI.
Lift
Scale
SYMPTOMS PROBABLE CAUSE SOLUTIONS
Seat and/or upper column feels loose. Nylon bushing is loose. Refer to Troubleshooting on
page 28.
Casters/brakes noisy or stiff. Fluff or debris in bearings. Clean the or replace the casters.
Electric actuator fails to lift when
button is pressed.
Hand-control or actuator
connector loose.
Battery is low.
Battery not connected properly
to control box.
The connecting terminals are
damaged.
Electric actuator in need of
service or load is too high.
Check connections.
Charge batteries. Refer to Charging
the Battery on page 16.
Reconnect the battery to the
control box. Refer to Charging the
Battery on page 16.
Replace the battery pack. Refer to
Charging the Battery
on page 16.
Contact ICCI.
Unusual noise from actuator. Actuator is worn or damaged or
spindle is bent.
Contact ICCI.
SYMPTOMS PROBABLE CAUSE SOLUTIONS
Scale does NOT work properly. Battery failure. Check battery. Replace if necessary.
Battery has been replaced and
scale still does NOT work properly.
Contact ICCI.