Invacare 1126360 3 Oxygen Equipment User Manual


 
CLEANING THE MASK AND HEADGEAR
Part No 1126360 9 Invacare
®
Twilight™II Nasal Mask
Cleaning the Mask and Headgear
ƽ WARNING
DO NOT expose any part of the mask system to direct
sunlight as it may cause mask deterioration.
After cleaning, ALWAYS rinse mask thoroughly.
Insufficient rinsing of cleaning agents can result in severe
skin rash, irritation and skin breakdown. Discontinue
using the mask if there is an allergic reaction to any part
of the mask and contact your health care professional.
For multi-patient use/reuse, clinicians should refer to the
Mask Disinfection and Sterilization Guide (p/n 1130216).
The Twilight II Headgear cannot be disinfected or
sterilized. Refer to instructions below for washing the
headgear.
CAUTION
ALWAYS be sure to remove any foreign material (dirt,
lint, etc.) from the exhalation vent holes.
DO NOT use bleach, chlorine, aromatic-based cleaning
solutions, scented oils, or moisturizing or antibacterial
soaps, to clean the nasal cushion, mask frame, headgear
or air hose. These solutions may cause hardening and
reduce the life of the product.
Alcohol may be used to clean the silicone nasal cushion
ONLY. DO NOT use alcohol to clean the mask frame,
headgear or air hose.
NOTE: Wash the mask system, except the headgear, after each use.
NOTE: Wash the headgear at least once per week.
NOTE: ALWAYS hand wash the headgear to increase the life of the
product.