Filter
Top Products
DISASSEMBLING THE MASK FOR CLEANING
Invacare
®
Twilight™II Nasal Mask 10 Part No 1126360
NOTE: It is not necessary to completely disassemble the mask for
daily cleaning in the home. The mask can be cleaned and rinsed
while still assembled. It is recommended, though, that the mask be
disassembled for cleaning at least once per week of use.
1. Disassemble the mask. Refer to Disassembling the Mask
for Cleaning on page 10.
2. Hand wash the headgear in warm or cool water using a
mild detergent.
3. Rinse the headgear thoroughly and allow to air dry.
4. Hand wash the mask components using a mild detergent,
such as dishwashing detergent, in warm water.
5. Rinse the mask components thoroughly and allow them to
air dry.
ƽ WARNING
Washing the mask in a dishwasher is not recommended.
Dishwasher cleaning and rinsing agents may leave a
residue on the mask, which may cause skin irritation.
DO NOT air dry in direct sunlight as it may cause mask
deterioration.
Disassembling the Mask for Cleaning
NOTE: For this procedure, refer to FIGURE 1 on page 7 and
FIGURE 3 on page 12.
1. Removing the mask. Refer to Removing the Mask and
Headgear on page 8
2. Detach the six foot air hose from the hose swivel.
3. Detach the headgear from the forehead support by
unfastening the hook-and-loop fastener tabs from the
headgear and sliding the straps out of the slots in the
forehead support (Detail “B” of FIGURE 1).