Invacare 1086189 Mobility Aid User Manual


 
Part No 1086188 3 Anti-tippers
8. Measurethedistancebetweenthebottomoftheantitipperwheelsandthe
ground/floor.
•NonAdjustableHeightAntiTipperAssemblies:Ifthedistancebetweenthebottomof
theantitipperwheelsandtheground/floorisnotto2inches,callInvacare
TechnicalSupportatthenumberlistedonthebackpage.
•AdjustableHeightAntiTipperAssemblies:Ifthedistancebetweenthebottomof
antitipperwheelsandtheground/floorisnotto2inches,adjustantitippers.Refer
toAdjustingAntiTippersonpage 3.
FIGURE 1 Installing Anti-Tippers
Adjusting Anti-Tippers
NOTE:Forthisprocedure,refertoFIGURE 2.
NOTE:Ato2inchclearancebetweenthebottomoftheantitipperwheelsandtheground/floor
MUSTbemaintainedatalltimes.
1. Pressthereleasebuttonsnearthewheeledportionoftheantitipperandslidethe
antitipperupordowntoachievetheto2inchclearance.
2. Checktomakesurethatthereleasebuttonsare fullyengagedintheadjustmentholes.
ƽ WARNING
WARNINGEnsure both anti-tippers are adjusted to the same height.
FIGURE 2 Adjusting Anti-Tippers
*NOTE:Nonadjustable
antitippershown.
15/16-inch
(STEP 3)
Plug Button or End
Cap (End cap not
shown) (STEP 1)
Spring Button(s)
(STEP 5)
*Anti-Tipper
Anti-Rattle
(if provided)
(STEP 4)
Locking Hole (9/32-inch Diameter)
(STEPS 2,3)
Lower
Frame
Tube
1½ inches
Release Buttons
2 inches