Ingersoll-Rand ML25K Personal Lift User Manual


 
KITS AND ACCESSORIES
Fabric Chain Container: Includes Chain Container, Brackets and all hardware necessary for installation on a Hoist
No. ML50K-K749-17 (03551066) for use on an ML25K or ML50K Hoist with up to a 17 ft lift and on an MLl00K
Hoist with up to a 9 ft lift.
No. ML50K-K749- 45 (0355 1074)
f
or use on an ML25K or ML50K Hoist with up to a 45 ft lift and on an MLl00K
Hoist with up to a 23 ft lift.
Link Chain Metal Containers: One (1) No. FMD2-68 (03 109642) Chain Container Bolt and one ( 1) No. Tll-58 (03 14 1538)
Lock Washer must be ordered with each Chain Container.
No. MLl0-749 (03195336) for use on an ML25K or ML50K Hoist with up to 13 ft lift and on an MLl00K Hoist with up
to 6-l/2 ft lift.
No. ML20-749A (03195369) for use on an ML25K or ML50K Hoist with up to 26 ft lift and on an MLl00K Hoist with
up to 13 ft lift.
No. ML20-749-20 (03195385) for use on an ML25K or ML50K Hoist with up to 40 ft lift and on an ML100K Hoist with
up to 40 ft lift.
Conversion Kits: Include all components necessary to convert a pull chain throttle Hoist to pendent control operation.
No. ML50K-K930-10 (03551 140) for use on any MLK Hoist with 10 ft lift (5 ft pendent length).
No. ML50K-K930 (03551207) for use on any MLK Hoist with other than 10 ft lift. Length of pendent must be specified
when ordering. Pendent bundle length is normally 5 ft shorter than lift.
Trolley Kits
No. CE120-K430 (03510435) Plain Trolley Kit - Includes all Trolley parts for suspending a Hoist equipped with lug
mounting from an I-beam having 3.00” to 5.00” (76 mm to 127 mm) wide flange 4” (102 mm) diameter wheels.
No. CE120-K430T (03510443) Plain Trolley Kit - Includes all Trolley parts for suspending a Hoist equipped with lug
mounting from a flat tread monorail having 2.66” to 5.00” (68 mm to 127 mm) wide flange 4” (102 mm) diameter
wheels.
No. MLK-K430 (03611019) Plain Trolley Kit for use with ML25K and ML50K Hoist. Includes all Trolley parts for sus-
pending a Hoist with lug mounting from an I-beam having 2.66” to 5.00” (68 mm to 127 mm) wide flange 3-l/8” (79
mm) diameter wheels.
Two and Three-Motor Pendents:
No. MLK-AL122 (03622487) - Two-motor pendent and hose assembly (Specify length of hose required).
No. MLK-AL132 (03622495) - Three-motor pendent and hose, assembly (Specify length of hose required.
Cross Mount:
No. ML500K-444 (03613023) for use on ML25K or ML50K.
No. MLl000K-444 (03613031) for use on MLl00K.
29