Filter
Top Products
English – 7
PRESENTATION
Stand DS50 and DS70
It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator′s manual as a valuable document. By following its′
content (using, service, maintenance etc) the life span and
the second-hand value of the machine can be extended. If
you will sell this machine, make sure that the buyer will get the
operator′s manual.
A purchase of one of our products gives you access to
professional help with repairs and services whenever this
may be necessary. If the retailer who sells your machine is not
one of our authorised dealers, ask him for the address of your
nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
• The stand features a modular design.
• The stands are secured using expanding screws.
• The drill column can be dismounted from the base plate.
This makes assembly easier.
• The feeder housing's transmission is adjustable. The
higher gives 2.5:1 and the lower, 1:1. The feed lever can
be mounted on both sides of the feeder housing.
• The feeder housing is equipped with a quick mounting for
a number of drilling machines.
• The feeder housing's slide function on the column is
adjusted with the 2 adjustment screws.
• The feed lever is equipped with a lock button for release.
• The stand makes angle drilling and pivot function
possible.
• Only fixed spanner (24 mm) and hex-key (6 mm) are
required to change the settings.
• The drill column can be variably adjusted through 360°.
• The feeder housing is prepared for quick mounting for
automatic feed unit which fits on both sides.
• The transport wheels can be removed.