Filter
Top Products
109
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Symbol: Shows the memory reading number.
Memory Average: Displays average of last 3 readings.
WHO Health Indicator: Compares blood pressure against
guidelines set by the World Health Organization. See page 21
for more information.
Display Symbols:
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure
again.
Pressure Exceeding 300 mmHg: Switch the unit off to
clear, then measure again.
Data Error: Remove and reload the batteries.
If any of the following letters and numbers appear in the area that diastolic
pressure should be displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more information.
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time
Indicator
Pulse Rate
BPA-101IB_ENGSP.qxd 10/24/05 11:00 AM Page 9