Filter
Top Products
.-‘...,
,.
:
.
.
._:-
:..
:_.
.,
:
._
..-..-j
-.
:.
2’
.I.--
-
:.
. .
.
.
‘:I
.
..(
:..I
.._...
.-
j
_
.’
\
Operating Instructions
Scale Programming
The Professional Body Fat Monitor and Scale can be programmed
to calculate the body fat composition
of up
to two different users. A
few steps must be followed to input the user’s height, age and
gen-
, der. Once the information is configured, it will only need to be reen-
tered if there is a change to the data.
Unit of Measurement
First, make sure the Professional Body Fat Monitor and Scale is in
the “standby” mode. When it is in standby, the LCD display should
be blank. If the LCD is not blank, simply wait several seconds with-
out touching or moving the Professional Body Fat Monitor and Scale
and the display will automatically shut off. On the back of the scale
platform, set the unit of measurement to “lb” or “kg.”
First Time Programming Instructions
Lift the display cover to reveal the keypad.
User Number: Push the “SET” button.
“1”
& “2” indicators will
appear. Toggle between user 1 and 2 by pressing
the user button. When the correct user number is
blinking press SET.
Height:
“Height” will begin to flash on the display. Using the
UP and DOWN buttons, continue until the correct
height is displayed. Press Age.
Age:
“Age” will begin to flash on the display. Using the
UP and DOWN buttons, continue until the correct
age is displayed. Press SET,
Gender:
Male and Female images will begin to flash on the
display. Toggle between the symbols by pressing the
GENDER button until the correct symbol appears.
Press SET.
Your correct user ID, height, gender and age will be displayed. Your
user profile has been successfully entered. You are now ready to
start achieving your fitness goals by monitoring your weight and
body fat composition. Read on for easy operating instructions.
2