Filter
Top Products
Insert Key and switch to "ON" position
Press down on Toggle switch momentarily.
Once platform has been lowered at least an
inch, unfold the platform. Continue lowering
to the ground.
Drive scooter onto platform as shown.
Raise platform until hold down foot depresses
scooter's deck or until lift's motor ratchets.
1
2
3
4
5
To remove the scooter and prepare the lift
for unloaded travel, follow above steps in
reverse order and reverse the direction
of the arrows.
Lift should be raised
with the platform folded
and until the lift's motor
ratchets. Verify that the
platform keeper has
engaged the platform's
pin.
PL
ATFORM's PIN
PL
ATF
ORM KEE
PER
LOADING A SCOOTER
AL 010 / 050
ON
DOWN
UP
"PLATFORM KEEPER"
WELDED TO
PLATFORM
Rear Wheels in Craddle
PULL to
TIGHTEN
PUSH to
RELEASE
Vehicle Hitch
OPERATION
Strap the scooter down using the 4 straps
located on each corner of the platform.
20