Harmar Mobility AL400 Mobility Aid User Manual


 
2
Section 1 - Unpacking the Lift
Your Fully Powered Inside Lift was factory pre-assembled to require little assembly before installation.
AL200 / AL400 Box contents should include:
Package Check List Hardware Package
Lifting Arm (# 1) Contents include:
Standard Post (# 2) Vehicle Wiring Harness (# 7)
Base (# 3) Hand Control (#8)
Strap & Hook Assembly (# 4,5,6) 3 - Installation Washers
Leg Extensions (#9) Required Fasteners
Black zip ties
Figure 1.1 Figure 1.2
AL200 Universal Inside Lift AL400 Fully Powered Lift
Figure 1.3
AL055 Economy Lift
Package Check List Hardware Package
Lifting Arm (# 1) Contents include:
Post (# 2) Vehicle Wiring Harness (# 7)
Base (# 3) Switch Harness (#8)
Strap & Hook Assembly 3 - Installation Washers
(# 4,5,6) Required Fasteners
Black zip ties
Be sure and check the contents of the box against the package check list to be sure that all parts are included with
the lift that are required for proper installation. If any parts are missing or if any damage is noted, immediately contact
the distributor from which you purchased your lift. DO NOT attempt to install or use the lift with any missing or dam-
aged parts.
1
2
9
4,5,6
8
3
#1
#2
#4,5,6
#3
#7
#8