Filter
Top Products
Page 9SKU 98982 For technical questions, please call 1-800-444-3353.
Displaying “HHHHHH” and emitting •
an alarm sound, meaning the zero
position is too high.
Displaying “LLLLLL” and emitting •
an alarm sound, meaning the zero
position is too low.
Should either of the above events
occur, make sure to check for proper
line voltage and Battery voltage.
Check that the Scale is level, it has
no load, and that its Platform (13) is
not touching any other object(s).
FIGURE E
Zero/Tare
Press the “ZERO/TARE” button the 1.
scale is empty (< 4% F.S.
1
) and the
scale will read zero at the current
weight. The zero indicator will also
show. (See Figure E.)
Press “ZERO/TARE” when the weight 2.
is positive (> 4% F.S.) and the tare in-
dicator will show. The scale will then
read based on the tare weight.
Remove all weight and press the 3.
“ZERO/TARE” button again to exit
tare mode.
1 Full Scale. The full capacity of the scale. For
this item, 330 lb. (150 kg).
Unit:
Press “UNIT” to choose the unit: Lb.
or Kg. (See Figure E.)
Hold:
Press “HOLD” at any time when 1.
weighing. The displayed value will
be locked and will not change with
weight. Meanwhile, the “HOLD” indi-
cator will show. (See Figure E)
Press “HOLD” again to exit the hold 2.
mode.
Note: Under the hold mode, the Scale will
sound an alarm when overloaded al-
though the displayed value does not
change.
Memory Functions:
With a stable weight on the scale, 1.
press “ADD“ to add the displayed
weight to the unit’s memory. (See
Figure E.) The M+ indicator will
show and the display will ash
{ADD=__} with the __ being the num-
ber of weights in memory and then
read the total accumulated weight
from memory.
Note: The unit will beep twice if the
value is not added (for example if
the weight does not remain constant
enough.)
Press “C” and the cumulative total will 2.
be cleared.
Settings
To adjust the backlight brightness, 1.
press “FUNC“ once and {BAC=0_}
will be displayed. The blank is the
brightness of the display backlight.