Harbor Freight Tools 96513 Mobility Aid User Manual


 
SKU 96513/14 For technical questions, please call 1-800-444-3353. Page 3
Use the right Ramp for the job. Do not attempt to force a small Ramp to do the work 10.
of a larger industrial Ramp. There are certain applications for which this Ramp was
designed. Do not modify this Ramp and do not use this product for a purpose for which
it was not intended.
Stay alert. Watch what you are doing, use common sense. Do not set up and use the 11.
Ramp when you are tired.
Check for damaged parts. Before using any tool, any part that appears damaged should 12.
be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment and binding of moving parts; any broken parts or mounting
xtures; and any other condition that may affect proper operation. Note: Dents or other
imperfections in the Ramp may lead to a weakening of the structural strength of this
product; do not use the ramp if this type of damage is noted.
Replacement parts and accessories. When servicing, use only identical replacement 13.
parts. Use of any other parts will void the warranty.
Do not use this product if under the inuence of alcohol or drugs. Read warning labels 14.
on prescriptions to determine if your judgment or reexes are impaired while taking drugs.
If there is any doubt, do not use the Ramp.
Maintenance. For your safety, maintenance should be performed regularly by a quali-15.
ed technician.
Ground contact. Use your Ramps on a solid, level, at, dry surface. Make sure the 16.
Tongue edge fully contacts the tailgate of the vehicle.
Clean Ramps. Prior to each use, clean dirt, oil, or any debris off ramps.17.
Load vehicle slowly. Never ride a vehicle up or down the load ramp.18.
Never exceed the 1000 lb. per pair, or 500 lb. per single Ramp maximum weight capac-19.
ity. Doing so can result in personal injury and/or damage to the ramp. Be aware of
dynamic loading! If you drop a load on the ramp or if the load bounces, it may create, for
a brief instant, an excess load which may result in damage to the ramp and/or personal
injury.
Check maximum tailgate weight capacity. Never exceed this capacity if tailgate capacity
is less than 1,250 lb.
Use Safety Chains to prevent ramps from sliding off tailgate only.20.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual 21.
cannot cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
UNPACKING
When unpacking, check to make sure the parts listed at the end of this manual are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual.
REV 08a