Harbor Freight Tools 66838 Mobility Aid User Manual


 
SKU 66838 For technical questions, please call 1-800-444-3353. Page 3
To loosen the brake cable, turn the Nut coun-9.
terclockwise.
There may be a secondary brake cable ten-10.
sion adjustment that will have to be made
as well. Use a 2mm Hex Key (not included)
to loosen the set screw near then end of
the brake cable just above the Wheel. See
Figure 5, below.
Please note: You will need to hold the brake 11.
cable in tension by holding the cable end
with pliers. Then, while the brake cable is in
tension, loosen the set screw.
Once the set screw is loosened, slide the 12.
cable clamp toward the brake lever. Then
retighten the set screw.
WARNING!13. If the brakes continue to loosen
after making these adjustment, contact
an authorized service technician to make
repairs.
Do NOT use Rolling Walker if Brakes do 14.
not function properly. Using the Rolling
Walker while brakes are not functioning
properly can lead to brake failure and
possible personal injury and property
damage.
CLEANING AND STORING
Clean Walker use a soft, damp cloth.1.
Remove Basket or Bag and fold Walker. To 2.
fold, pull on tie cord wrapped around Support
Axle (42).
Store folded Walker in dry, secure area. 3.
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Some parts are listed and shown for illustra-
tion purposes only, and are not available
individually as replacement parts.
PLEASE READ THE FOLLOWING
CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS DOCUMENT AS
A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE
IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
Figure 5
Wheel
Set Screw