Filter
Top Products
SKU 3305 For technical questions, please call 1-800-444-3353. Page 5
CLEANING
Read the ENTIRE IMPORTANT
SAFEGUARDS section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION OR ELECTRIC
SHOCK:
Before cleaning this
Ultrasonic Cleaner, make sure
the “OFF” Button is pushed
off, the cord is unplugged,
and the unit has cooled
completely.
Do not immerse motor, cord,
or plug in water or any other
liquid.
Dry with a soft cloth. Wipe the hous-1.
ing with a soft clean cloth or sponge.
Allow unit to dry completely before 2.
use.
ASSEMBLY
NOTE: No assembly is required for this
Ultrasonic Cleaner.
OPERATION
Read the ENTIRE IMPORTANT
SAFEGUARDS section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Clean the appliance before each use 1.
by wiping the interior and exterior
with a clean, soft cloth.
NOTE: FAILURE TO FILL THE 2.
ULTRASONIC CLEANER WITH
WATER OR A NON-CORROSIVE
CLEANING MATERIAL BEFORE
USING WILL SEVERELY DAMAGE
IT AND VOID THE WARRANTY.
Using the Ultrasonic Cleaner
Place the Ultrasonic Cleaner on a 1.
counter top or table capable of hold-
ing both the Cleaner and it’s contents.
Fill the tank with water.2.
Put the articles in the plastic basket 3.
and place them in the tank. Ensure
the water lever below the “Max-” line.
Plug in the Ultrasonic Cleaner into a 4.
120V outlet. The inner blue light will
turn on.
Press the “ON” button to start clean-5.
ing, the Light (red) will go on on. See
Figure 1.
Figure 1
Light (red)
6. 3 minutes later, the item is nished
cleaning. The Cleaner will stop auto-
matically. The light will go off.