Harbor Freight Tools 3305 Ultrasonic Jewelry Cleaner User Manual


 
SKU 3305 For technical questions, please call 1-800-444-3353. Page 3
trical parts of the unit may be im-
mersed for cleaning. Thoroughly
clean and dry these parts prior to rst
use and before every subsequent
use.
Unplug from outlet when not in use 2.
and before maintenance or cleaning.
Do not operate any appliance with 3.
a damaged cord or plug or after the
appliance malfunctions or has been
damaged in any manner. Return
appliance to the nearest authorized
service facility for examination, repair,
or adjustment.
Do not use this product in a damp or 4.
wet location.
Do not clean with metal scouring 5.
pads. Metal pieces can break off the
pads and touch electrical parts involv-
ing risk of shock.
Power Cord Safety
This Ultrasonic Cleaner is equipped 1.
with a 2-prong plug. A short power
supply cord is provided to reduce risk
of entanglement or tripping over a
longer cord.
Longer extension cords are available 2.
and may be used if care is exercised
in their use.
If a long extension cord is used, 3.
the marked electrical rating of the a.
(detachable power supply cord or)
extension cord should be at least as
great as the electrical rating of the
appliance,
if the appliance is of the grounded b.
type, the extension cord should be a
grounding type 3-wire cord, and
the longer cord should be arranged c.
so that it will not drape over the
counter top or tabletop where it can
be pulled on by children or tripped
over.
General and Specic Safety
Precautions
DO NOT clean emeralds with any 1.
ultrasonic cleaner. All other jewelry is
safe.
Do not place Ultrasonic Cleaner 2.
where it can fall or be pulled into a
tub, sink or other free-standing con-
tainer of water. Operate the product
on a dry, level surface capable of
supporting the Ultrasonic Cleaner
and it’s contents.
Never immerse the Ultrasonic Clean-3.
er in liquid.
Do not submerge non-waterproof 4.
objects in this Ultrasonic Cleaner.
Do not overll the Cleaner. Use water 5.
only to the “MAX-” line when lling
the Tank.
Do not clean multiple objects at one 6.
time. Using many objects in the tank
at one time will cause them to bang
against one another, damaging both
the articles being cleaned and the
Tank.
WARNING: Use only lukewarm wa-7.
ter. Do not use penetrating oils in
the Ultrasonic Cleaner as they may
damage the Cleaner and any ma-
terials being cleaned. Never use
volatile solvents, gasoline, or other
ammable liquids.
Never leave the Ultrasonic Cleaner 8.
unattended when it is plugged into an