Filter
Top Products
Model T10008 2000 Kg Digital Crane Scale-6-
SECTION 4: OPERATIONS
Scale Functions
F
u
n
c
t
i
o
n
D
i
s
p
l
a
y
A
c
t
i
o
n
Off/On 2000 Maximum capacity in Kg.
U X.XX Current battery voltage
99999 Warming up
88888
77777
66666
55555
44444
33333
22222
11111
00000
- XX Current weight
0 Steady light will engage, ready
Turning the Scale ON
After your crane scale has been properly
suspended, familiarize yourself with the
functions both on the scale and on the
remote control. Begin by holding down the
ON/OFF button on the scale to turn it ON
(Figure 4). Each time the scale is turned
on, it will flash a series of displays. Use the
table below to familiarize yourself with the
display and its meanings.
Tare Function
The tare function will allow you to auto
-
matically deduct the weight of the weigh-
ing platforms or containers, resulting in a
final weight of only the items that you want
weighed (the net weight). When your scale
is ready, attach your weighing platform to
the lifting hook at the bottom of the scale,
then wait until the "STEADY" light comes
on. Before placing any items on the plat-
form, deduct the weight of the platform
by pressing the TARE button on the scale
(Figure 4), or by pressing Tare on the
remote control. After you have selected
the Tare function for the platform, the scale
will return to 0 lbs. between loads until you
turn off the scale.
Power Saving
If the load is left at stable status, ("STEADY"
as shown in Figure 4), for longer than 15
minutes, the screen will flash "–" to save
power and will return to normal weighing
readings when the load is changed. If
the load is left at stable status for over 60
minutes, the scale will turn OFF automati-
cally.
Figure 4. Scale face.
Remote Receiver Window
Tare LED Display
ON/OFF Button
Load Stable LED Display
Tare Button
Hold LED Display
To guarantee accuracy for your crane
scale, allow it warm up without a load for
3-5 minutes.