Filter
Top Products
US0208-INS-LAB-RevD11 • Patriot Homecare Bed 9
BED END ASSEMBLY
All bed models: Assemble bed head end
1. Insert one locking and one non-locking caster into bed end. Locking casters must be installed
diagonally from each other. See previous page for full-electric caster position options.
2. Standing directly in front of the bed end, position it as close to the bed as possible.
3. With one hand, reach over end and lift up the bed.
bed head end
frame (head)
Attach bed head end
4. Tilt the bed end slightly back toward you as shown above.
Engage lower rivet
lock
rivet
Lower bed onto lock
5. Engage lower rivet slightly with corner lock and tilt end toward bed as shown at above left.
6. Lower bed onto corner lock as shown at above right.
All models: Assemble bed foot end
After bed head end has been attached, perform steps 1-6 in All models: Assemble bed head end
above to install the foot end.