Filter
Top Products
US0208-INS-LAB-RevD11 • Patriot Homecare Bed 17
5 SPECIFICATIONS, ALL MODELS *
* Specifications are subject to change without notice.
Deck
height
High position
Deck height: High Position
US0208 / US0208PL:
24.0 inches
US0458 / US0458PL with cast-
ers in low position: 20.0 inches
US0458 / US0458PL with
casters in standard position:
23.5 inches
Low position
Deck height: Low Position
US0208 / US0208PL:
15.0 inches
US0458 / US0458PL with cast-
ers in low position: 9.5 inches
US0458 / US0458PL with
casters in standard position:
13 inches
Bed length
Info: To extend grid length (80
in.) to 84 in., install optional kit
690-0084-000
(all beds).
Bed Length
All models: 87.0 inches
Deck width
Deck Width
All models: 36.0 inches
Weight *
Normal operating conditions 450 lb, evenly distributed including mattress, accessories, rails, etc.
* Maximum patient weight 350 lb
Construction
Frame 10 ga (.135) high strength, low alloy steel (roll formed)
Sleeping surface 11 ga (.120) cold rolled steel
Finish
5 stage bath 1. S21F acid bath (cleans grease and oil from metal).
2. Fresh water rinse.
3. QuiliPhos 20 phosphate coat (inhibits rust and helps maintain
electrical charge during powder application).
4. Fresh water rinse.
5. QuiliRinse 404 (seals metal for powder coating).
All parts are then coated with a colored epoxy powder and baked 35 minutes at 375 degrees F. The
powder coating nish is approximately 2.5 mils thick. The coating is smooth, uniform nish without
runs, wrinkles, or grit.