Filter
Top Products
2D:4>6C:42?#65:42=&C@5F4ED25:G:D:@?@762=E9&C@5F4ED?4K#2EC:IK(,#2?F2= &
ositioning Specifications
P
The Matrix II Bed Series has infinite positions that serve to help the patient
be more comfortable and gives the practitioner easy access during procedures,
transfers, etc. The correct placement of the bed is essential for the patient’s safety.
The bed should always be set to its lowest position when the patient is left unattended.
The head and knee functions allow the resident/patient to raise their head or legs.
The recommended maximum distance for the head function is 70˚. In the event
of a power outage, it is preferred that the knee and back sections be lowered using
an emergency battery pack. If unavailable, the sections can be set into the flat
position by easily removing the actuator mounting pins.
MAXIMUM (High Position)
Bed height from floor to
sleep deck top = 25.00”
MINIMUM
(Low Position)
Bed height from floor to
sleep deck top = 8.90”
DISTANCE TO WALL (High)
Headboard mounting tube to
end of std. wallsaver = 1.75”
DISTANCE TO WALL (Low)
Headboard mounting tube to
end of std. wallsaver = 1.50”
MAXIMUM
(Head Angle)
Head deck to sleep surface = 70º
MINIMUM
(Knee Angle)
Knee deck to sleep surface = 30º
MAXIMUM
(Knee/Foot Angle)
Knee deck to foot deck = 45º
QUICK REFERENCE:
B
B
=@@C