Filter
Top Products
Pressure Tap Installation for ThermoLazer
332653A 3
Pressure Tap Installation for ThermoLazer
1. Close manual gas shutoff valve on propane tank.
2. Disconnect gas supply hose (99) from propane tank.
3. Remove and discard existing gas line (3) by
unscrewing from elbow fitting (161) and unscrewing
from gas safety valve adapter fitting (164).
4. Remove and discard existing elbow fitting (161) by
unscrewing from manual gas shutoff valve (9).
5. Apply pipe sealant to elbow fitting (8) and screw into
manual gas shutoff valve (9). Screw in until gas
tight. Position fitting as shown.
6. Apply pipe sealant to adapter fitting (7) and screw
into tee fitting (11). Screw in until gas tight.
7. Apply pipe sealant to adapter fitting (4) and screw
into tee fitting (11). Screw in until gas tight.
8. Apply pipe sealant to adapter fitting (7) and screw
into elbow fitting (8). Screw in until gas tight. Posi-
tion fittings as shown.
9. Install new gas line (3) by screwing into gas safety
valve adapter fitting (164) and screwing into adapter
fitting (4). Screw in until gas tight.
10. Connect gas supply hose (99) to propane tank.
11. Open manual gas shutoff valve on propane.
12. Check gas lines for gas leaks (see ThermoLazer
Operation Manual).
ti14128a
ti22097a
99
ti22104a
161
9
164
3
ti22114a
8
7
14
5
4
3
164
ti14411b
99
ti14127a