Filter
Top Products
GOSSEN Foto- und Lichtmeßtechnik 11
– Enter the "seconds" of the desired length
of time. Confirm by pressing and holding
the function button until the OK-signal will
sound. The timer will now be in the Start/
Stop function.
– Push the key M to start the timer.
The display will show the remaining time
of the count-down. In addition to that,
during the last 10 seconds of the count-
down, interrupted signals can be heard.
At the end of the set time, a continued
signal will sound.
– To pause the count-down, push the
measuring key; pressing it again will
restart the count-down.
The timer will work in the background so
that you can use other measurements.