Filter
Top Products
Buzzaround Owner’s Manual -
Updated 092605
Page 29
ASSEMBLY OF YOUR GB 101 BUZZAROUND
™
WARNING: DO NOT SIT ON OR OPERATE YOUR SCOOTER UNLESS THE LOCKING
MECHANISM IS ENGAGED.
WARNING: BE AWARE OF ANY POSSIBLE PINCH POINTS WHEN CONNECTING THE
REAR FRAME TO THE FRONT FRAME. PLEASE NOTE WARNING LABLES AT PINCH
POINTS WHEN ASSEMBLING.
Pinch Point : A pinch point is an area where you MUST consider your fingers to
be sure your fingers DO NOT become pinched between two metal areas. The
greatest chance of pinch points become possible during the assembly of the
Buzzaround™ scooter. See photo below to become knowledgeable with this
area.
WARNING!!!
Be sure not to position a finger between
the metal frames! This can cause
injury. Look very carefully before
assembling!
To fold the Buzzaround Lite to a flat position, please follow these steps::
Remove seat from seat
post.
Loosen lock at base of seat
post so the battery box can
be removed.
Remove battery box.
Loosen tiller knob.
Fold down the tiller.
Make certain that you
securely tighten the tiller
knob before picking up
the scooter.