Filter
Top Products
Buzzaround Owner’s Manual -
Updated 092605
Page 40
ASSEMBLING YOUR GB 104 BUZZAROUND
™
2. Place one hand on the upper portion
of the seat post and tilt the rear
component to the position shown.
While keeping your hand on the seat
post, lift the front component (using
the locking handle) with your other
hand and place the connector
brackets on the pins of the rear
component (Fig. 2).
WATCH YOUR FINGERS!
3. Remove your hand from the locking
handle and keep it clear of all
moving components. Using your
hand that is on the seat post, slowly
lower the rear component.
4. Press the locking handle down to a
fully horizontal position to lock the
frames together.
5. Connect the main cable.
6. Install the battery box, seat, adjust
the tiller, and engage the brake.
WARNING
Pinch Point!
WATCH YOUR FINGERS!
#2
WARNING
: Make sure you
tighten your tiller to be sure it is
locked!
#3
#4
#5
#6
Ad
j
ust tiller
Brake
Install seat
Batter
y
box