Filter
Top Products
Buzzaround Owner’s Manual -
Updated 092605
Page 34
CARE AND MAINTENANCE OF YOUR GB 104
BUZZAROUND
™
CHARGING
You can charge your Buzzaround™ batteries while the battery box is on the
scooter or it can be removed and charged at another location. See the
“Disassembly” section for information on how to remove the battery box.
To Charge the Batteries:
1. Make certain your key is in the “OFF” position
2. Uncoil the charger AC cord and plug it into the “Charger Power
Receptacle”(shown above).
3. Plug the charger AC cord into a working electric outlet.
Note: The charger “LED” light should now illuminate a red color, after a
few seconds, the LED will change to yellow. This indicates that the
batteries are being charged.
4. When the charging cycle is complete, the LED will change to green.
5. Unplug and stow the charger cord.
Trouble Shooting Tips:
If batteries fail to charge within 24 hours…
• Check the battery connections.
• It may be necessary to have the batteries “load tested” by your dealer.
• It may be necessary to have the charger tested.
NOTICE: DO NOT LEAVE BATTERIES PLUGGED IN FOR MORE THAN 12
HOURS. CAN CAUSE DAMAGE TO BATTERIES AND A HAZARDOUS
CONDITION.