Golden Technologies GB106XR Mobility Scooter User Manual


 
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR Updated 07/08
Page 35
Transporting Your GB-106 Buzzaround Lite
Note
: Buzzaround Lite scooters can be equipped with docking devices for
loading into/onto a vehicle by means of mechanical lift or hoist. Golden
Technologies does not sell this lifting equipment, however you may contact your
local home health care dealer for more information.
To Transport your Buzzaround Lite
You will want to consider the best way for transportation. Do you own a van?
Do you own a SUV? Do you own a compact car? Depending on what type of
vehicle you transport the Buzzaround Lite in, you will want to plan where you
will store your scooter while driving.
Disassemble or fold down the seat and tiller to easily load into your
vehicle.
Do not lift your Buzzaround Lite by its plastic body parts. These parts are
not designed to be used as handles. Also, damage to these parts is NOT
covered in any warranty.
Do not use tires or wheels to lift the rear carriage. The carriage may
rotate and cause injury or damage.
Use moving blankets or other forms of padding to protect your GB-106
Buzzaround Lite during transportation.
WARNING: IF YOUR SCOOTER AND ITS COMPONENTS ARE NOT PROPERLY
AND SECURELY STOWED, THE SCOOTER OR COMPONENTS MAY SHIFT WHILE
DRIVING CAUSING INJURY OR DAMAGE.
If the scooter is transported in the vehicle when fully assembled:
- no one should sit on the scooter during loading.
- no one should sit on the scooter during transport.
WARNING: If you use an outside lift system, be sure to secure your
Buzzaround Lite as it could fall off the lift. Also, if any electronics are
exposed to moisture they may fail.