Filter
Top Products
Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR Updated 07/08
Page 15
OPERATION
Armrest Width Adjustment
To adjust the armrest width:
1. Loosen the adjustment knobs at the rear of the seat.
2. Slide the armrests in or out to the desired width.
3. Tighten the adjustment knobs.
Max arm width: 24”
WARNING: BE SURE ADJUSTMENT KNOBS ARE SECURELY TIGHTENED AGAINST THE
INSERTED ARM REST TUBE. DO NOT EXCEED MAXIMUM ARM WIDTH.
Seat Height Adjustment
To adjust the seat height:
1. Remove the seat by holding the Seat Rotation Lever up and lifting the seat
straight up.
2. Set the seat aside.
3. Remove ball detent pin or the bolt, nut, and washers that hold the seat
post in the seat pedestal.
4. Position the seat post at the desired height while aligning the holes in the
seat post and the seat pedestal.
5. Reinstall the ball detent pin or nut, bolt, and washers and
tighten securely.