Golden Technologies GP601 Mobility Aid User Manual


 
Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 11/30/06
26
OPERATION
Figure 20
Reset Button
If the main circuit breaker trips, please wait for approximately 1 minute and
then push the reset button to reset the main circuit breaker. See figure 20.
NOTE: Usually, the thermal rollback feature is more sensitive than the main circuit
breaker. We recommend that you turn off the power to the chair and wait
for five minutes when the chair suddenly loses speed or power. Doing so
will allow the overheated electrical components to cool to their normal
operating temperatures.
SWING-AWAY DESK ARM
Your Compass
is equipped with a swing-away desk arm that provides you with the con-
venience of positioning your chair close to a work surface such as a table or desk.
To swing the desk arm simply push on the side of the joystick until the joystick swings to
the retracted position. See figures 21, 22, and 23.
Figure 21 Figure 22 Figure 23
Reset Button
(circuit breaker)