Filter
Top Products
The external microphone can also be wall mounted with the wall clip
supplied.
The RED LED is flashing
• Charge the battery
The loopHEAR
TM
keeps on switching off
• Make sure that the batteries are fully charged
You cannot hear clearly due to interference or you cannot hear at all
• .Make sure the loopHEAR
TM
is switched on and facing you
• .Move the loopHEAR
TM
closer to you
BATTERY USAGE:
To ensure that your loopHear is always ready for use please follow the
recommendations below:
• Always switch off when not in use
• Always recharge the batteries after continuous use for more than 6
hours or when the red LED is ON
• Recharge the batteries every four months if the unit has been
switched OFF for long periods of time
As a rough guide the battery will allow the following usage depending on
the volume levels and ambient noise:
• STANDBY WHEN TURNED OFF 4
MONTHS
• STANDBY WHEN TURNED ON BUT NOT IN USE 2 DAYS
• IN CONTINUOUS USE 8
HOURS FROM FULLY CHARGED BATTERY
11
12
TROUBLESHOOTINGUSING THE loo
p
HEAR
TM
Simply stick the wall clip to the wall
in the most convenient location.
Gently push the external
microphone into the microphone
holder.